Guangdong Cimlineya Technology Industry Co., Ltd.
Main products:truck mounted hotbox with heater,crack sealing machine
Products
Contact Us
  • Contact Person : Mr. Liu Terry
  • Company Name : Guangdong Cimlineya Technology Industry Co., Ltd.
  • Tel : 86-760-88722007
  • Fax : 86-760-88722007
  • Address : Guangdong,Zhongshan,15#, Xi'er Street, Hubin RD, Shiqi District
  • Country/Region : China
  • Zip : 528400

Sealant TE-I

Sealant TE-I
Product Detailed
High quality hot applied crack sealant Road maintenance material Protect grooved road surfaces Cost-effective

 

DESCRIPTION

CIMARY TE-I is a high quality hot applied crack sealant, composition of asphalt cement, virgin synthetic polymer, premium rubber, and other modifiers. It has been tested to be fully suitable for road surface repair. The performance is superior to ASTM D5329, AASHTO M173 standards. It’s solid under normal temperature, and will change into gel of super stretch and adhesion after melted by heating, which can effectively seal the cracks and joints in the pavement and remain sealed effects in long-term. Traffic can be restored right after construction completion.

APPLICABILITY

CIMARY TE-I is a pavement preservation sealant intended for highway, street and aviation applications for sealing transverse joints and random transverse cracks in Asphalt or Concrete pavements where low resilience sidewall force is desired. It apply to the temperate zone (-10°C-40°C)

APPLICATION

CIMARY TE-I shall be heated in a hot-oil jacketed melter capable of constant mechanical agitation and equipped with a calibrated thermometer to monitor sealant temperature. It can be applied immediately after heated to recommended application temperature by means of hand-held pot, wheel d push bander or wand applicator.

PHYSICAL PROPERTY and TECHNICAL SPECIFICATION

Test

Method

Test result

Softening point

ASTM D5329

≥82°C

Cone penetration(25°C)

ASTM D5329

≤90

Resilience(25°C)

ASTM D5329

≥80%

Flow(60°C)

ASTM D5329

≤3mm

Ductility (25°C)

ASTM D5329

≥30cm

Asphalt compatibility

ASTM D5329

Pass

Plasticity

Utah DOT

Pass (≤-6°C)

Tensile strength

ASTM D5329

≥400%

Bond

ASTM D5329

Pass

APPLICATION TEMPERATURE 

Recommend application temperature

193-204°C

Maximum heating temperature

204°C

Best construction atmospheric temperature

7-18°C

PACKAGE

CIMARY TE-I is packaged in cardboard boxes and protected with a plastic, convenient for pick and place.

WARRANTY

CIMLINEYA warrants that according to internal laboratory testing the products meets applicable product specification at the time of delivery as described in the applicable products specification in this product data sheet.

Typical sealing configurations are shown below

Sealant TE-I



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.